Tag Archives: screw and

China supplier Dry Screw Vacuum Pump Can Be Used in Harsh Working Conditions, and Easy to Do Anti-Corrosion Treatment vacuum pump

Product Description

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

Type                                                                             Basic parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) Overall dimension
(length*width*height)
mm
LGV-180 180 5 4 2900 40 40 2 < 78 1157x375x734
LGV-250 250 5 5.5 2900 50 40 5.5 <78 1462x417x820
LGV-360 360 5 7.5 2900 50 40 4 W78 1462x455x820
LGV-540 540 5 11 2900 65 50 8 W80 1578x543x860
LGV-720 720 5 15 2900 80 65 10 <80 1623x562x916
LGV-1100 1100 5 22 2900 100 80 14 w 80 1866x598x1050
LG V-1800 1800 5 37 2900 150 100 20 w 80 2092×951 x 1150

Characteristic Curve

 

Detailed Photos

 

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

The company cooperates with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents. Adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump
Customization:
Available

|

screw vane pump

Are there energy-efficient options for screw vacuum pumps?

Yes, there are energy-efficient options available for screw vacuum pumps. Here’s a detailed explanation of energy-efficient features and technologies that can be found in screw vacuum pumps:

1. Variable Frequency Drives (VFD):

Screw vacuum pumps equipped with Variable Frequency Drives (VFD) offer energy efficiency by allowing precise control of the pump’s rotational speed. VFDs adjust the motor speed according to the required vacuum level, resulting in reduced energy consumption compared to fixed-speed pumps. By matching the pump’s speed to the process demands, VFDs help optimize energy usage and minimize unnecessary energy losses.

2. High-Efficiency Motors:

Energy-efficient screw vacuum pumps often incorporate high-efficiency motors. These motors are designed to minimize energy losses and improve overall efficiency. High-efficiency motors typically comply with international efficiency standards, such as the International Electrotechnical Commission (IEC) standards or the National Electrical Manufacturers Association (NEMA) standards, and are classified with high efficiency ratings, such as IE3 or NEMA Premium.

3. Advanced Control Systems:

Modern screw vacuum pumps may feature advanced control systems that optimize energy consumption. These systems utilize intelligent algorithms to monitor and adjust the pump’s operation based on real-time process conditions. By continuously assessing the demand for vacuum and adapting the pump’s performance accordingly, advanced control systems help reduce energy waste and improve overall energy efficiency.

4. Energy Recovery Systems:

Some screw vacuum pumps are equipped with energy recovery systems that capture and utilize energy that would otherwise be wasted. These systems can include heat exchangers or energy regeneration units that repurpose excess heat from the pump’s operation. By utilizing this recovered energy for other processes, such as preheating or heating applications, energy recovery systems contribute to increased overall system efficiency.

5. Optimized Pump Design:

Manufacturers continuously work on optimizing the design of screw vacuum pumps to improve energy efficiency. This can involve reducing internal friction, optimizing rotor profiles, and minimizing leakage paths. These design enhancements aim to maximize the pump’s performance while minimizing energy losses, resulting in improved overall energy efficiency.

6. Energy Monitoring and Analysis:

Energy-efficient screw vacuum pumps often come with built-in energy monitoring and analysis features. These systems allow operators to monitor the energy consumption of the pump in real-time and analyze energy usage patterns. By identifying energy-intensive periods or inefficiencies, operators can make informed decisions to optimize the pump’s operation and further improve energy efficiency.

7. Energy Efficiency Certifications:

Energy-efficient screw vacuum pumps may carry energy efficiency certifications or labels, such as the ENERGY STAR® certification or the European Union’s Energy Efficiency Directive compliance. These certifications provide reassurance that the pump has undergone testing and meets specific energy efficiency criteria, providing confidence in its energy-saving capabilities.

In summary, energy-efficient options for screw vacuum pumps exist and incorporate features such as Variable Frequency Drives (VFD), high-efficiency motors, advanced control systems, energy recovery systems, optimized pump design, energy monitoring and analysis capabilities, and energy efficiency certifications. By utilizing these energy-efficient options, industries can reduce energy consumption, lower operating costs, and minimize their environmental impact.

screw vane pump

What safety features should be considered when operating screw vacuum pumps?

When operating screw vacuum pumps, it is important to consider several safety features to ensure the protection of personnel, equipment, and the surrounding environment. Here’s a detailed explanation of the safety features that should be considered:

1. Overpressure Protection:

Screw vacuum pumps should be equipped with overpressure protection mechanisms to prevent the system from exceeding safe pressure limits. This can include pressure relief valves or rupture discs that automatically release excess pressure to avoid equipment damage or catastrophic failures. It is essential to set the pressure relief devices at appropriate levels and regularly inspect and maintain them to ensure their proper functioning.

2. Emergency Stop Button:

An emergency stop button should be easily accessible near the screw vacuum pump or within the control panel. This allows operators to quickly shut down the pump in case of emergencies, such as equipment malfunction, safety hazards, or personnel injury. The emergency stop button should be clearly labeled, well-maintained, and tested regularly to ensure its effectiveness.

3. Motor and Drive Protections:

The motor and drive system of the screw vacuum pump should be equipped with safety features to prevent overheating, overloading, and electrical faults. This can include thermal overload protection, motor temperature sensors, current monitoring devices, and short-circuit protection mechanisms. These safety features help safeguard the integrity of the motor and drive system, reducing the risk of fire, electrical hazards, and equipment damage.

4. Vacuum Level Monitoring:

Monitoring the vacuum level is crucial for safe operation. Screw vacuum pumps should be equipped with vacuum gauges or sensors to provide real-time information on the vacuum level. This allows operators to ensure that the system is operating within the desired range and helps detect any abnormal conditions or leaks. Alarms or visual indicators can also be implemented to alert operators when the vacuum level deviates from the set parameters.

5. Cooling and Ventilation:

Screw vacuum pumps generate heat during operation, and adequate cooling and ventilation systems should be in place to prevent overheating. This can include fans, heat exchangers, or cooling fins to dissipate heat effectively. Proper ventilation should be ensured to prevent the accumulation of flammable or hazardous gases. It is important to regularly inspect the cooling and ventilation systems and clean or replace components as needed to maintain optimal performance and safety.

6. Isolation and Lockout/Tagout:

Isolation valves should be installed in the suction and discharge lines of screw vacuum pumps to allow for safe maintenance, repair, or shutdown procedures. Lockout/Tagout (LOTO) procedures should be followed when performing maintenance or service activities. This involves locking and tagging the energy sources, such as electrical power or compressed air, to prevent accidental startup or release of stored energy. Adequate training and awareness of LOTO procedures are essential for personnel safety.

7. Safety Signage and Labels:

Clear and visible safety signage and labels should be placed near the screw vacuum pump and control panel to provide important safety information, warnings, and operating instructions. This includes labels for emergency stop buttons, voltage ratings, hazardous areas, and safety precautions. Safety signs should comply with relevant standards and regulations and be regularly inspected to ensure their visibility and legibility.

8. Operator Training and PPE:

Proper training should be provided to operators working with screw vacuum pumps to ensure they understand the safe operating procedures, potential hazards, and emergency protocols. Operators should also wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection, as required by the specific operating conditions and industry regulations.

In summary, several safety features should be considered when operating screw vacuum pumps. These include overpressure protection, emergency stop buttons, motor and drive protections, vacuum level monitoring, cooling and ventilation systems, isolation and lockout/tagout procedures, safety signage, operator training, and the use of personal protective equipment. Implementing these safety features helps mitigate risks, protect personnel and equipment, and maintain a safe working environment during screw vacuum pump operation.

screw vane pump

What are the typical applications of screw vacuum pumps in various industries?

Screw vacuum pumps find a wide range of applications across various industries due to their efficiency, reliability, and versatility. Here are some typical applications of screw vacuum pumps in different industries:

Chemical Processing:

  • Vacuum distillation and drying processes
  • Vacuum filtration and solvent recovery
  • Crystallization and evaporation systems
  • Chemical reactors and vacuum drying ovens

Pharmaceuticals:

  • Vacuum drying and freeze-drying of pharmaceutical products
  • Deaeration and degassing processes
  • Vacuum packaging and sealing
  • Purification and distillation of pharmaceutical compounds

Food and Beverage:

  • Deaeration and removal of dissolved gases in food and beverage products
  • Evaporation and concentration processes
  • Freeze drying and vacuum packaging
  • Vacuum cooling and drying of food products

Power Generation:

  • Steam condenser and turbine exhaust applications
  • Deaeration and vacuum systems in power plants
  • Vacuum distillation in the production of power plant chemicals
  • Transformer drying and impregnation

Electronics Manufacturing:

  • Vacuum drying and degassing of electronic components
  • Vacuum soldering and brazing processes
  • Thin film deposition and vacuum coating
  • Printed circuit board manufacturing

Wastewater Treatment:

  • Vacuum filtration and sludge dewatering
  • Vacuum degassing and deaeration of wastewater
  • Evaporation and concentration of wastewater streams

Environmental Applications:

  • Landfill gas recovery and treatment
  • Vacuum drying and deodorization in waste management
  • Vacuum systems for air pollution control

Other Industries:

  • Oil and gas industry for vapor recovery and gas processing
  • Automotive industry for vacuum metallurgy and component manufacturing
  • Textile industry for vacuum drying and deaeration of fabrics
  • Research and development laboratories for various scientific applications

These are just a few examples of the many applications of screw vacuum pumps in various industries. The versatility and reliability of screw vacuum pumps make them suitable for a wide range of vacuum-related processes, enabling enhanced productivity, improved product quality, and cost savings in diverse industrial settings.

China supplier Dry Screw Vacuum Pump Can Be Used in Harsh Working Conditions, and Easy to Do Anti-Corrosion Treatment   vacuum pump	China supplier Dry Screw Vacuum Pump Can Be Used in Harsh Working Conditions, and Easy to Do Anti-Corrosion Treatment   vacuum pump
editor by CX 2024-04-16

China Hot selling for Clean Vacuum of Oil-Free Dry Air Cooled Screw Vacuum Pump vacuum pump and compressor

Product Description

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.Dry Oil-Free Air Cooling Screw Vacuum Pump ,This is an advanced and widely used vacuum pump at present, It is 1 of the best-selling products of our company.
 It adopts explosion-proof motor with high configuration, It has the characteristics of low noise, no oil and pollution, clean and high vacuum, simple and convenient use, operation and maintenance, Widely used in many industries, For example, oil and gas recovery, vacuum coating, biomedicine, food processing, single crystal furnace, vacuum forming, vacuum melting, electronic photovoltaic, semiconductor synthesis and many other industries are used.
The dry oil-free screw vacuum pump produced by our company is divided into air cooling and water cooling according to the extraction rate, and there are many models for you to choose.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

Type
(Air cooled series)
                                                                            Basic parameters 
Pumping speed
(m3/h)
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Overall dimension
(length*width*height)
(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 30 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 90 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

Characteristic Curve

 

Detailed Photos

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

New plant plHangZhou

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

High precision machining equipment

The company cooperates with many scientific research institutions and universities, such as ZheJiang University, China University of petroleum, ZheJiang Institute of mechanical design, etc.with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents.Our technology is leading, the product quality is stable, the product has a good reputation in China’s domestic market, is sold all over the country, and is exported to Europe, America, Africa, the Middle East and Southeast Asia,We adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.

Product quality wins consumer cooperation

In shipment

ISO 9001

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Lifetime Paid Service
Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Customization:
Available

|

screw vane pump

What are the cost considerations when purchasing and maintaining screw vacuum pumps?

When purchasing and maintaining screw vacuum pumps, several cost considerations come into play. Here’s a detailed explanation of the key factors to consider:

1. Initial Purchase Cost:

The initial purchase cost of a screw vacuum pump is an important consideration. The cost can vary depending on factors such as the pump’s capacity, specifications, features, and the manufacturer. Generally, screw vacuum pumps tend to have a higher upfront cost compared to some other types of vacuum pumps. However, it’s essential to evaluate the long-term benefits and performance advantages offered by screw vacuum pumps to determine their overall value for the specific application.

2. Energy Consumption:

Energy consumption is a significant ongoing cost associated with operating screw vacuum pumps. While screw vacuum pumps are known for their high efficiency, it’s important to consider the power requirements and energy consumption of the specific pump model. Opting for energy-efficient screw vacuum pumps can result in long-term cost savings by reducing electricity bills and minimizing the environmental impact. Additionally, pumps equipped with advanced control systems or variable speed drives allow for better energy optimization and can further enhance cost-effectiveness.

3. Maintenance and Service:

Maintenance and service costs are important considerations throughout the lifecycle of a screw vacuum pump. Regular maintenance is necessary to ensure optimal performance, reliability, and longevity of the equipment. The specific maintenance requirements and associated costs can vary depending on the pump model and manufacturer. It’s crucial to follow the manufacturer’s recommended maintenance schedule and guidelines. Some maintenance tasks may include changing seals, replacing filters, inspecting and lubricating bearings, and monitoring performance parameters. Proper maintenance can prevent costly breakdowns, extend the pump’s service life, and minimize unexpected repair expenses.

4. Spare Parts and Consumables:

When budgeting for screw vacuum pumps, it’s important to consider the cost of spare parts and consumables. Over time, certain components of the pump may require replacement, such as seals, gaskets, filters, or lubricants. The availability and cost of these spare parts can vary depending on the pump model and manufacturer. It’s advisable to inquire about the availability, pricing, and expected lifespan of consumables when purchasing the pump and factor these costs into the overall budget.

5. Operational Downtime:

Operational downtime can have significant cost implications for any industrial process. When a screw vacuum pump requires maintenance, repair, or replacement, it may result in downtime, leading to production interruptions, decreased efficiency, and potential revenue loss. Therefore, it’s important to consider the reliability, serviceability, and availability of technical support when choosing a screw vacuum pump. Opting for reputable manufacturers with a track record of providing reliable products and responsive customer support can help minimize operational downtime and mitigate associated costs.

6. Lifecycle Cost Analysis:

When evaluating the cost considerations of screw vacuum pumps, it’s beneficial to conduct a lifecycle cost analysis. This analysis takes into account not only the initial purchase cost but also the long-term operational costs, maintenance expenses, energy consumption, and expected service life of the pump. By considering the total cost of ownership over the pump’s lifespan, including factors like efficiency, reliability, and maintenance requirements, it becomes easier to assess the cost-effectiveness of different pump options and make informed purchasing decisions.

7. Warranty and After-Sales Support:

Considering the warranty and after-sales support offered by the pump manufacturer is essential. A comprehensive warranty can provide cost protection against potential defects or premature failures. Additionally, reliable after-sales support, technical assistance, and readily available spare parts can contribute to minimizing downtime, reducing repair costs, and ensuring the long-term performance of the screw vacuum pump.

In summary, the cost considerations when purchasing and maintaining screw vacuum pumps include the initial purchase cost, energy consumption, maintenance and service expenses, spare parts and consumables, operational downtime, lifecycle cost analysis, and warranty and after-sales support. By carefully evaluating these factors and assessing the specific needs of the application, businesses can make informed decisions to optimize cost-effectiveness and achieve reliable vacuum pump performance.

screw vane pump

Are there noise and vibration considerations when using screw vacuum pumps?

Yes, there are noise and vibration considerations when using screw vacuum pumps. Here’s a detailed explanation of the noise and vibration factors associated with screw vacuum pumps:

1. Noise Generation:

Screw vacuum pumps can generate noise during their operation. The noise level depends on various factors, including the pump’s design, speed, motor type, and the specific application. While screw vacuum pumps are generally quieter compared to some other types of vacuum pumps, noise levels can still vary. It’s important to consider the noise emissions of the pump, especially in environments where noise control and worker comfort are important factors.

2. Vibration:

Screw vacuum pumps can also produce vibrations during their operation. Vibrations may result from mechanical forces, imbalances, misalignment, or resonance within the pump or its associated components. Excessive vibration can lead to reduced pump performance, accelerated wear of parts, and potential damage to the pump or connected equipment. It’s essential to minimize and control vibrations to ensure smooth and reliable operation.

3. Impact on Performance:

Excessive noise and vibration can negatively impact the performance of screw vacuum pumps. High noise levels can indicate inefficiencies, mechanical issues, or the need for maintenance. Vibrations can cause misalignment, decreased sealing effectiveness, and increased wear on components, affecting the pump’s overall efficiency and vacuum generation capability. Monitoring and addressing noise and vibration concerns are crucial to maintaining optimal pump performance.

4. Noise Control Measures:

To mitigate noise generated by screw vacuum pumps, several noise control measures can be implemented. These include using sound enclosures or barriers around the pump to reduce noise propagation, installing vibration isolation mounts or pads to minimize vibration transmission to surrounding structures, and employing acoustic insulation materials to absorb and dampen noise. Additionally, selecting pumps with lower noise ratings or opting for models specifically designed for reduced noise emissions can help minimize noise concerns.

5. Vibration Control and Maintenance:

To address vibration issues, it is important to ensure proper installation and alignment of the screw vacuum pump. This includes using appropriate mounting techniques and ensuring proper anchoring to reduce vibrations. Regular maintenance, such as inspections, lubrication, and replacement of worn-out components, can help prevent excessive vibrations and maintain smooth pump operation. Additionally, balancing rotating parts and addressing any misalignment or resonance issues can help minimize vibrations and extend the pump’s service life.

6. Occupational Health and Safety:

Noise and vibration considerations are essential from an occupational health and safety perspective. Prolonged exposure to high noise levels can have detrimental effects on worker health, including hearing damage and increased stress levels. Vibrations can also contribute to operator discomfort and fatigue. It is important to comply with relevant workplace noise regulations, provide appropriate personal protective equipment, and implement measures to minimize noise and vibration exposure for personnel working with or around screw vacuum pumps.

In summary, noise and vibration considerations are important when using screw vacuum pumps. By implementing noise control measures, addressing vibration issues, ensuring proper maintenance, and prioritizing occupational health and safety, the noise and vibration levels associated with screw vacuum pumps can be effectively managed. This helps maintain pump performance, prolong equipment life, and provide a safe and comfortable working environment.

screw vane pump

What are the advantages of using a screw vacuum pump in industrial processes?

Using a screw vacuum pump in industrial processes offers several advantages, making it a preferred choice for various applications. Here are some key advantages:

  • High Efficiency: Screw vacuum pumps are known for their high efficiency in handling large volumes of gas or vapor. They operate based on positive displacement, ensuring consistent performance regardless of pressure differentials. This high volumetric efficiency allows for faster evacuation and quicker process cycles, increasing overall productivity.
  • Wide Operating Range: Screw vacuum pumps are capable of maintaining stable vacuum levels across a wide range of pressures. They can achieve both low and high vacuum levels, making them versatile for different industrial processes. This wide operating range enables their use in applications that require precise control of vacuum levels.
  • Continuous Operation: Screw vacuum pumps are designed for continuous operation without the need for frequent shutdowns or maintenance. They can handle demanding industrial processes that require sustained vacuum levels for extended periods. This continuous operation improves productivity and reduces downtime.
  • Reliability and Durability: Screw vacuum pumps are known for their reliability and robust construction. They are designed to withstand harsh operating conditions, including high temperatures, corrosive environments, and heavy-duty applications. Their durable design and materials ensure long service life and minimal maintenance requirements.
  • Low Noise Levels: Screw vacuum pumps generally produce lower noise levels compared to other types of vacuum pumps. This feature is particularly beneficial in industrial settings where noise reduction is important for the comfort and safety of workers.
  • Ability to Handle Wet and Dirty Gases: Screw vacuum pumps can handle wet and dirty gases effectively without compromising performance. They are designed to handle condensable vapors, particulates, and liquid carryover, which makes them suitable for applications where the gas or vapor may contain contaminants.
  • Reduced Environmental Impact: Screw vacuum pumps often incorporate energy-efficient designs, resulting in reduced power consumption and lower operating costs. Additionally, some models may include features such as oil-free operation, which eliminates the need for lubricating oil and reduces the environmental impact.
  • Application Versatility: Screw vacuum pumps find applications in a wide range of industries, including chemical processing, pharmaceuticals, food and beverage, power generation, electronics manufacturing, and more. They are capable of handling various gases and vapors, making them adaptable to different industrial processes.

Overall, the advantages of using a screw vacuum pump in industrial processes include high efficiency, wide operating range, continuous operation, reliability, low noise levels, ability to handle wet and dirty gases, reduced environmental impact, and application versatility. These factors contribute to improved productivity, cost savings, and enhanced process control, making screw vacuum pumps a popular choice in many industrial settings.

China Hot selling for Clean Vacuum of Oil-Free Dry Air Cooled Screw Vacuum Pump   vacuum pump and compressor	China Hot selling for Clean Vacuum of Oil-Free Dry Air Cooled Screw Vacuum Pump   vacuum pump and compressor
editor by CX 2024-04-15

China wholesaler Oil Free, Environmentally Friendly and Efficient Air-Cooled Screw Vacuum Pump vacuum pump engine

Product Description

 

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

Type                                                                             Basic parameters
Pumping speed
(m3/h)
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Overall dimension
(length*width*height)
(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 2 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 5.5 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 4 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 8 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 10 ≤80 1000x410x495

 

Characteristic Curve

 

Detailed Photos

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

New plant plHangZhou

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

High precision machining equipment

The company cooperates with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents. Adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.

 Product quality wins consumer cooperation

ISO9001

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Oil Free, Environmentally Friendly and Efficient a
Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Customization:
Available

|

screw vane pump

What is the typical lifespan of a screw vacuum pump?

The typical lifespan of a screw vacuum pump can vary depending on various factors, including the quality of the pump, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation of the factors that can influence the lifespan of a screw vacuum pump:

1. Quality and Design:

The quality and design of the screw vacuum pump play a significant role in its lifespan. High-quality pumps manufactured by reputable companies tend to have longer lifespans compared to lower-quality or poorly designed pumps. Pumps with robust construction, durable materials, and reliable components are more likely to withstand the rigors of operation and have an extended service life.

2. Maintenance Practices:

Proper maintenance is crucial for maximizing the lifespan of a screw vacuum pump. Regular maintenance activities, such as lubrication, inspection, and cleaning, help ensure the pump operates optimally and minimizes wear and tear. Following the manufacturer’s recommended maintenance schedule, using the correct lubricants, and addressing any issues promptly can significantly extend the pump’s lifespan.

3. Operating Conditions:

The operating conditions in which the screw vacuum pump is used can impact its lifespan. Factors such as temperature, pressure, humidity, and the presence of corrosive or abrasive substances can affect the pump’s performance and longevity. Pumps designed for specific operating conditions or equipped with protective measures, such as coatings or corrosion-resistant materials, may have an extended lifespan in challenging environments.

4. Usage Patterns:

The usage patterns of the screw vacuum pump also influence its lifespan. Factors such as duty cycle, operating hours, and load variations can impact the wear and tear on the pump’s components. Pumps subjected to continuous or heavy-duty usage may experience more significant wear and have a shorter lifespan compared to pumps used intermittently or under lighter loads.

5. Maintenance and Repair History:

The maintenance and repair history of the screw vacuum pump can provide insights into its lifespan. Pumps that have been well-maintained, with regular servicing, timely repairs, and component replacements as needed, are more likely to have longer lifespans. Conversely, pumps that have a history of neglected maintenance or frequent breakdowns may have reduced lifespans.

6. Technological Advancements:

The ongoing advancements in screw vacuum pump technology can also impact the lifespan of pumps. Newer generations of pumps may incorporate improved designs, materials, and components that enhance reliability and durability. Pumps featuring advanced monitoring and diagnostic capabilities can help detect and address potential issues before they escalate, thus prolonging the pump’s lifespan.

It is important to note that the typical lifespan of a screw vacuum pump can range from several years to several decades, depending on the aforementioned factors. While some pumps may require replacement after a decade or so of service, well-maintained pumps operating in favorable conditions can exceed 20 years of reliable operation.

Ultimately, to determine the specific lifespan of a screw vacuum pump, it is advisable to consult the manufacturer’s guidelines, consider the operating conditions, and implement a proactive maintenance program to ensure optimal performance and longevity.

screw vane pump

What is the range of vacuum levels that screw vacuum pumps can achieve?

Screw vacuum pumps are capable of achieving a wide range of vacuum levels, depending on the specific design and operating characteristics of the pump. Here is a detailed explanation of the typical range of vacuum levels that screw vacuum pumps can achieve:

1. Low Vacuum:

Screw vacuum pumps can operate in the low vacuum range, typically defined as vacuum levels between atmospheric pressure (760 torr) and around 1 torr. In this range, screw vacuum pumps can efficiently handle applications that require moderate vacuum levels, such as packaging, drying processes, and general industrial applications.

2. Medium Vacuum:

Screw vacuum pumps are also suitable for medium vacuum applications, which typically range from about 1 torr down to approximately 10^-3 torr (or 0.001 torr). In this range, screw vacuum pumps offer reliable performance and can be used in various industries and processes, including chemical processing, vacuum distillation, freeze drying, and composite manufacturing.

3. High Vacuum:

While screw vacuum pumps are not typically used for achieving ultra-high vacuum levels, they can still operate in the high vacuum range. High vacuum is generally defined as vacuum levels below 10^-3 torr (or 0.001 torr) down to around 10^-6 torr (or 0.000001 torr). Screw vacuum pumps can be employed in high vacuum applications where slightly higher pressures are acceptable, such as in research laboratories, vacuum coating, and some semiconductor manufacturing processes.

It’s important to note that the achievable vacuum levels may vary depending on factors such as the specific design and size of the screw vacuum pump, the gas composition being pumped, system conductance, and the presence of any leaks or contaminants in the vacuum system. Additionally, the performance of a screw vacuum pump may also be influenced by the process conditions and the specific application requirements.

In summary, screw vacuum pumps can achieve vacuum levels ranging from low vacuum (around 1 torr) to medium vacuum (down to approximately 10^-3 torr) and can also operate in the high vacuum range (below 10^-3 torr). The appropriate range of vacuum level for a specific application should be determined based on the process requirements, industry standards, and the capabilities of the screw vacuum pump.

screw vane pump

What are the advantages of using a screw vacuum pump in industrial processes?

Using a screw vacuum pump in industrial processes offers several advantages, making it a preferred choice for various applications. Here are some key advantages:

  • High Efficiency: Screw vacuum pumps are known for their high efficiency in handling large volumes of gas or vapor. They operate based on positive displacement, ensuring consistent performance regardless of pressure differentials. This high volumetric efficiency allows for faster evacuation and quicker process cycles, increasing overall productivity.
  • Wide Operating Range: Screw vacuum pumps are capable of maintaining stable vacuum levels across a wide range of pressures. They can achieve both low and high vacuum levels, making them versatile for different industrial processes. This wide operating range enables their use in applications that require precise control of vacuum levels.
  • Continuous Operation: Screw vacuum pumps are designed for continuous operation without the need for frequent shutdowns or maintenance. They can handle demanding industrial processes that require sustained vacuum levels for extended periods. This continuous operation improves productivity and reduces downtime.
  • Reliability and Durability: Screw vacuum pumps are known for their reliability and robust construction. They are designed to withstand harsh operating conditions, including high temperatures, corrosive environments, and heavy-duty applications. Their durable design and materials ensure long service life and minimal maintenance requirements.
  • Low Noise Levels: Screw vacuum pumps generally produce lower noise levels compared to other types of vacuum pumps. This feature is particularly beneficial in industrial settings where noise reduction is important for the comfort and safety of workers.
  • Ability to Handle Wet and Dirty Gases: Screw vacuum pumps can handle wet and dirty gases effectively without compromising performance. They are designed to handle condensable vapors, particulates, and liquid carryover, which makes them suitable for applications where the gas or vapor may contain contaminants.
  • Reduced Environmental Impact: Screw vacuum pumps often incorporate energy-efficient designs, resulting in reduced power consumption and lower operating costs. Additionally, some models may include features such as oil-free operation, which eliminates the need for lubricating oil and reduces the environmental impact.
  • Application Versatility: Screw vacuum pumps find applications in a wide range of industries, including chemical processing, pharmaceuticals, food and beverage, power generation, electronics manufacturing, and more. They are capable of handling various gases and vapors, making them adaptable to different industrial processes.

Overall, the advantages of using a screw vacuum pump in industrial processes include high efficiency, wide operating range, continuous operation, reliability, low noise levels, ability to handle wet and dirty gases, reduced environmental impact, and application versatility. These factors contribute to improved productivity, cost savings, and enhanced process control, making screw vacuum pumps a popular choice in many industrial settings.

China wholesaler Oil Free, Environmentally Friendly and Efficient Air-Cooled Screw Vacuum Pump   vacuum pump engine	China wholesaler Oil Free, Environmentally Friendly and Efficient Air-Cooled Screw Vacuum Pump   vacuum pump engine
editor by CX 2024-04-13

China Professional Air Cooled Screw Vacuum Pump for Oil and Gas Recovery vacuum pump electric

Product Description

 

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

Type                                                                             Basic parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) Overall dimension
(length*width*height)
mm
LGV-180 180 5 4 2900 40 40 2 < 78 1157x375x734
LGV-250 250 5 5.5 2900 50 40 5.5 <78 1462x417x820
LGV-360 360 5 7.5 2900 50 40 4 W78 1462x455x820
LGV-540 540 5 11 2900 65 50 8 W80 1578x543x860
LGV-720 720 5 15 2900 80 65 10 <80 1623x562x916
LGV-1100 1100 5 22 2900 100 80 14 w 80 1866x598x1050
LG V-1800 1800 5 37 2900 150 100 20 w 80 2092×951 x 1150

Characteristic Curve

 

Detailed Photos

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

The company cooperates with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents. Adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Lifetime Paid Service
Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Customization:
Available

|

screw vane pump

Are there environmentally friendly options for screw vacuum pumps?

Yes, there are environmentally friendly options available for screw vacuum pumps. Here’s a detailed explanation of the eco-friendly features and considerations associated with screw vacuum pumps:

1. Oil-Free Operation:

One of the key environmentally friendly features of screw vacuum pumps is their ability to operate without the use of oil. Traditional vacuum pumps, such as rotary vane pumps or liquid ring pumps, often require oil for lubrication and sealing. However, oil-free screw vacuum pumps eliminate the need for oil, resulting in cleaner and more environmentally friendly operation. Oil-free pumps can be particularly beneficial in applications where the pumped gases come into direct contact with the process or need to remain free from oil contamination.

2. Reduced Emissions:

Screw vacuum pumps contribute to reduced emissions compared to certain other types of pumps. By eliminating oil from the operation, there is no risk of oil carryover or vapor emissions that could adversely affect the environment. This is especially important in applications where the pumped gases contain volatile compounds, as oil-free screw vacuum pumps help prevent the release of harmful substances into the atmosphere. Additionally, screw vacuum pumps with built-in gas and vapor ballast options can further reduce emissions by facilitating the extraction of condensable vapors and preventing their release into the environment.

3. Energy Efficiency:

Energy efficiency is a crucial factor in environmentally friendly operation. Screw vacuum pumps are known for their high efficiency, which translates into reduced energy consumption. By minimizing power requirements, energy-efficient screw vacuum pumps help conserve energy and lower greenhouse gas emissions. Choosing pumps with advanced control systems, variable speed drives, or frequency converters can further enhance energy efficiency by allowing precise control and optimization of pump performance based on demand.

4. Noise Reduction:

Screw vacuum pumps often have quieter operation compared to certain other types of pumps. The design of screw pumps, with balanced rotors and reduced internal clearances, helps minimize noise and vibration. Reduced noise levels not only contribute to a more comfortable and quieter working environment but also have positive environmental implications by minimizing noise pollution in surrounding areas.

5. Long Service Life and Durability:

Screw vacuum pumps are typically built with durable materials and have a robust design, resulting in a long service life. Prolonged equipment lifespan reduces the need for frequent replacements, minimizing waste generation and the environmental impact of manufacturing new pumps. Additionally, the durability of screw vacuum pumps translates into fewer maintenance requirements and less material consumption over time.

6. Waste Management:

When it comes to waste management, screw vacuum pumps offer advantages such as reduced oil disposal requirements. Unlike oil-sealed pumps that require regular oil changes and proper disposal of used oil, oil-free screw vacuum pumps eliminate this waste stream. This simplifies waste management processes and reduces the potential environmental hazards associated with oil handling and disposal.

7. Compliance with Environmental Regulations:

Many screw vacuum pump manufacturers prioritize environmental responsibility and design their products to comply with relevant environmental regulations and standards. These may include requirements for energy efficiency, emissions control, noise levels, and material restrictions. By choosing pumps from reputable manufacturers that prioritize environmental considerations, users can ensure the equipment meets or exceeds the necessary environmental compliance requirements.

In summary, environmentally friendly options for screw vacuum pumps include oil-free operation, reduced emissions, energy efficiency, noise reduction, long service life and durability, waste management advantages, and compliance with environmental regulations. By opting for these eco-friendly features, industries can minimize their environmental footprint and contribute to sustainable practices.

screw vane pump

What is the range of vacuum levels that screw vacuum pumps can achieve?

Screw vacuum pumps are capable of achieving a wide range of vacuum levels, depending on the specific design and operating characteristics of the pump. Here is a detailed explanation of the typical range of vacuum levels that screw vacuum pumps can achieve:

1. Low Vacuum:

Screw vacuum pumps can operate in the low vacuum range, typically defined as vacuum levels between atmospheric pressure (760 torr) and around 1 torr. In this range, screw vacuum pumps can efficiently handle applications that require moderate vacuum levels, such as packaging, drying processes, and general industrial applications.

2. Medium Vacuum:

Screw vacuum pumps are also suitable for medium vacuum applications, which typically range from about 1 torr down to approximately 10^-3 torr (or 0.001 torr). In this range, screw vacuum pumps offer reliable performance and can be used in various industries and processes, including chemical processing, vacuum distillation, freeze drying, and composite manufacturing.

3. High Vacuum:

While screw vacuum pumps are not typically used for achieving ultra-high vacuum levels, they can still operate in the high vacuum range. High vacuum is generally defined as vacuum levels below 10^-3 torr (or 0.001 torr) down to around 10^-6 torr (or 0.000001 torr). Screw vacuum pumps can be employed in high vacuum applications where slightly higher pressures are acceptable, such as in research laboratories, vacuum coating, and some semiconductor manufacturing processes.

It’s important to note that the achievable vacuum levels may vary depending on factors such as the specific design and size of the screw vacuum pump, the gas composition being pumped, system conductance, and the presence of any leaks or contaminants in the vacuum system. Additionally, the performance of a screw vacuum pump may also be influenced by the process conditions and the specific application requirements.

In summary, screw vacuum pumps can achieve vacuum levels ranging from low vacuum (around 1 torr) to medium vacuum (down to approximately 10^-3 torr) and can also operate in the high vacuum range (below 10^-3 torr). The appropriate range of vacuum level for a specific application should be determined based on the process requirements, industry standards, and the capabilities of the screw vacuum pump.

screw vane pump

Can screw vacuum pumps handle both dry and wet processes?

Yes, screw vacuum pumps are capable of handling both dry and wet processes, making them versatile for a wide range of applications. The ability to handle both types of processes depends on the specific design and configuration of the screw vacuum pump, as well as any additional features or accessories that may be incorporated. Here’s a detailed explanation:

Dry Processes:

In dry processes, the screw vacuum pump operates without the presence of liquid or moisture. Dry screw vacuum pumps rely on tight clearances between the rotors (screws) and the pump housing to create an effective seal. This seal prevents gas or vapor from leaking back into the inlet or escaping to the atmosphere. The absence of liquid or moisture in the process stream helps maintain the integrity of the pump’s sealing mechanism and ensures reliable operation. Dry screw vacuum pumps are commonly used in applications where the process gas or vapor is predominantly dry and free from liquid carryover or condensable vapors.

Wet Processes:

In wet processes, the screw vacuum pump encounters liquids or moisture along with gas or vapor. These liquids can be in the form of condensable vapors, liquid carryover, or entrained liquid droplets. To handle wet processes, screw vacuum pumps may incorporate additional features or accessories to prevent damage, maintain performance, and ensure reliable operation. Some common methods used to handle wet processes include:

  • Liquid Seals: Certain screw vacuum pump designs utilize a liquid sealant to create a barrier between the process gas or vapor and the pump’s internal components. The liquid sealant helps prevent gas leakage, provides lubrication, and assists in sealing the clearances between the rotors and housing. This feature enables the pump to handle wet processes effectively by containing the liquid and maintaining proper sealing.
  • Separators and Filters: Screw vacuum pumps can be equipped with separators and filters to separate liquid droplets or solid particles from the gas or vapor stream. These components help protect the pump from potential damage caused by liquid or solid contamination and ensure the efficient operation of the pump.
  • Specific Design Considerations: Screw vacuum pump manufacturers may incorporate design modifications to enhance the pump’s ability to handle wet processes. This can include optimized clearances, corrosion-resistant materials, and specialized coatings or treatments to protect against liquid or moisture exposure.

It’s important to note that the specific capabilities of a screw vacuum pump in handling wet processes may vary between different models and manufacturers. Therefore, when selecting a screw vacuum pump for a wet process application, it is advisable to consult the manufacturer’s specifications, recommendations, and any additional guidance provided to ensure the pump is suitable for the intended process conditions.

In summary, screw vacuum pumps can handle both dry and wet processes, although the specific design and features of the pump may need to be considered for optimal performance in wet applications. Dry screw vacuum pumps are suitable for predominantly dry processes, while wet processes may require the use of liquid seals, separators, filters, or specialized design considerations to handle the presence of liquids or moisture effectively.

China Professional Air Cooled Screw Vacuum Pump for Oil and Gas Recovery   vacuum pump electricChina Professional Air Cooled Screw Vacuum Pump for Oil and Gas Recovery   vacuum pump electric
editor by CX 2024-04-08

China Professional Air Cooled Screw Vacuum Pumps for Lectronics, Metallurgy, Chemical, Food, Machinery, Medicine, Aerospace and Other Departments vacuum pump for ac

Product Description

Dry Screw Vacuum Pump RSB571

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.

There is no medium in the working chamber, which can obtain a clean vacuum.
No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

Product Parameters

Product Model 50/60Hz RSB571
Pumping Speed 50Hz 18m³/H
60Hz 22m³/H
Ultimate Pressure mbar 0.03
Inlet Diameter   KF40
Voltage 50Hz 200-240/345-415V
60Hz 220-275/380-480V
Motor Power kW 1.5
Rotate Speed r/min 2900/3500
Noise Level dB 72
Cooling Mode   Air Cooling
Net Weight kg 48

 

Detailed Photos

Installation Instructions

 

Certifications

Company Profile

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Screw Number: Double Screw Pump
Screw Suction Method: Single Suction
Pump Shaft Position: Horizontal
Performance: Anticorrosion
Application: Chemical
Certification: CE, ISO
Samples:
US$ 4500/Set
1 Set(Min.Order)

|

Customization:
Available

|

screw vane pump

What are the cost considerations when purchasing and maintaining screw vacuum pumps?

When purchasing and maintaining screw vacuum pumps, several cost considerations come into play. Here’s a detailed explanation of the key factors to consider:

1. Initial Purchase Cost:

The initial purchase cost of a screw vacuum pump is an important consideration. The cost can vary depending on factors such as the pump’s capacity, specifications, features, and the manufacturer. Generally, screw vacuum pumps tend to have a higher upfront cost compared to some other types of vacuum pumps. However, it’s essential to evaluate the long-term benefits and performance advantages offered by screw vacuum pumps to determine their overall value for the specific application.

2. Energy Consumption:

Energy consumption is a significant ongoing cost associated with operating screw vacuum pumps. While screw vacuum pumps are known for their high efficiency, it’s important to consider the power requirements and energy consumption of the specific pump model. Opting for energy-efficient screw vacuum pumps can result in long-term cost savings by reducing electricity bills and minimizing the environmental impact. Additionally, pumps equipped with advanced control systems or variable speed drives allow for better energy optimization and can further enhance cost-effectiveness.

3. Maintenance and Service:

Maintenance and service costs are important considerations throughout the lifecycle of a screw vacuum pump. Regular maintenance is necessary to ensure optimal performance, reliability, and longevity of the equipment. The specific maintenance requirements and associated costs can vary depending on the pump model and manufacturer. It’s crucial to follow the manufacturer’s recommended maintenance schedule and guidelines. Some maintenance tasks may include changing seals, replacing filters, inspecting and lubricating bearings, and monitoring performance parameters. Proper maintenance can prevent costly breakdowns, extend the pump’s service life, and minimize unexpected repair expenses.

4. Spare Parts and Consumables:

When budgeting for screw vacuum pumps, it’s important to consider the cost of spare parts and consumables. Over time, certain components of the pump may require replacement, such as seals, gaskets, filters, or lubricants. The availability and cost of these spare parts can vary depending on the pump model and manufacturer. It’s advisable to inquire about the availability, pricing, and expected lifespan of consumables when purchasing the pump and factor these costs into the overall budget.

5. Operational Downtime:

Operational downtime can have significant cost implications for any industrial process. When a screw vacuum pump requires maintenance, repair, or replacement, it may result in downtime, leading to production interruptions, decreased efficiency, and potential revenue loss. Therefore, it’s important to consider the reliability, serviceability, and availability of technical support when choosing a screw vacuum pump. Opting for reputable manufacturers with a track record of providing reliable products and responsive customer support can help minimize operational downtime and mitigate associated costs.

6. Lifecycle Cost Analysis:

When evaluating the cost considerations of screw vacuum pumps, it’s beneficial to conduct a lifecycle cost analysis. This analysis takes into account not only the initial purchase cost but also the long-term operational costs, maintenance expenses, energy consumption, and expected service life of the pump. By considering the total cost of ownership over the pump’s lifespan, including factors like efficiency, reliability, and maintenance requirements, it becomes easier to assess the cost-effectiveness of different pump options and make informed purchasing decisions.

7. Warranty and After-Sales Support:

Considering the warranty and after-sales support offered by the pump manufacturer is essential. A comprehensive warranty can provide cost protection against potential defects or premature failures. Additionally, reliable after-sales support, technical assistance, and readily available spare parts can contribute to minimizing downtime, reducing repair costs, and ensuring the long-term performance of the screw vacuum pump.

In summary, the cost considerations when purchasing and maintaining screw vacuum pumps include the initial purchase cost, energy consumption, maintenance and service expenses, spare parts and consumables, operational downtime, lifecycle cost analysis, and warranty and after-sales support. By carefully evaluating these factors and assessing the specific needs of the application, businesses can make informed decisions to optimize cost-effectiveness and achieve reliable vacuum pump performance.

screw vane pump

Can screw vacuum pumps be used for vacuum packaging and sealing processes?

Yes, screw vacuum pumps can be used for vacuum packaging and sealing processes. Screw vacuum pumps offer several advantages that make them suitable for these applications. Here’s a detailed explanation:

1. Efficient Evacuation:

Screw vacuum pumps are known for their high pumping speed, which allows them to quickly evacuate the packaging chamber. By removing air and other gases from the packaging environment, screw vacuum pumps create the necessary vacuum conditions for packaging and sealing processes.

2. Consistent Vacuum Levels:

Screw vacuum pumps are capable of maintaining consistent vacuum levels throughout the packaging and sealing process. This is important to ensure reliable and uniform packaging results. The stable vacuum levels achieved by screw vacuum pumps help preserve product quality, extend shelf life, and prevent spoilage or degradation of packaged goods.

3. Control and Automation:

Screw vacuum pumps can be easily integrated into packaging and sealing systems, allowing for precise control and automation of the vacuum process. They can be equipped with sensors, controllers, and programmable logic controllers (PLCs) to monitor and adjust the vacuum levels, packaging parameters, and sealing operations. This enables efficient and repeatable packaging processes.

4. Versatility:

Screw vacuum pumps are versatile and can handle a wide range of packaging materials, including flexible pouches, bags, trays, and rigid containers. They can accommodate different sizes and shapes of packaging, making them suitable for various industries such as food and beverage, pharmaceuticals, electronics, and consumer goods.

5. Oil-Free Operation:

Many screw vacuum pumps are designed to operate without the use of lubricating oil or fluids. This oil-free operation eliminates the risk of oil contamination in the packaging process, making them particularly suitable for applications where cleanliness and hygiene are crucial, such as in the food industry or medical packaging.

6. Reliability and Durability:

Screw vacuum pumps are known for their robust construction and reliable performance. They are designed to handle continuous operation and can withstand the demanding conditions of packaging and sealing processes, including frequent start-stop cycles and exposure to moisture, dust, or other contaminants.

7. Cost-Effectiveness:

Using screw vacuum pumps for vacuum packaging and sealing processes can be cost-effective in the long run. They offer energy-efficient operation, low maintenance requirements, and long service life, resulting in reduced operating costs and improved productivity.

In summary, screw vacuum pumps are well-suited for vacuum packaging and sealing processes. Their efficient evacuation capabilities, ability to maintain consistent vacuum levels, control and automation features, versatility, oil-free operation, reliability, and cost-effectiveness make them a valuable choice for a wide range of industries that require vacuum packaging and sealing of products.

screw vane pump

What are the different types of screw vacuum pumps available in the market?

There are several different types of screw vacuum pumps available in the market, each with its own design and operating characteristics. Here are some of the commonly used types of screw vacuum pumps:

1. Single-Stage Screw Vacuum Pumps:

Single-stage screw vacuum pumps consist of a single pair of intermeshing screws (rotors) that rotate to create vacuum. These pumps are commonly used for low to medium vacuum applications and can achieve a wide range of vacuum levels. Single-stage screw vacuum pumps are known for their compact design, high pumping speed, and efficient operation.

2. Multi-Stage Screw Vacuum Pumps:

Multi-stage screw vacuum pumps consist of multiple stages, each with its own pair of intermeshing screws. The gas or vapor is sequentially compressed and evacuated through multiple stages, allowing for higher vacuum levels to be achieved. Multi-stage screw vacuum pumps are suitable for applications requiring deeper vacuum levels, such as in chemical processing, power generation, and semiconductor manufacturing.

3. Dry Screw Vacuum Pumps:

Dry screw vacuum pumps operate without the use of any lubricating fluid in the pumping chamber. These pumps rely on tight clearances between the rotors and housing to create a seal and achieve vacuum. Dry screw vacuum pumps are preferred in applications where oil contamination or the presence of lubricating fluids is undesirable, such as in the electronics, pharmaceutical, and food processing industries.

4. Liquid Ring Screw Vacuum Pumps:

Liquid ring screw vacuum pumps combine the principles of liquid ring vacuum pumps and screw vacuum pumps. These pumps use a liquid ring as the sealing and compression medium, while the screws provide the positive displacement action. Liquid ring screw vacuum pumps are known for their capability to handle wet processes and carryover of liquid or condensable vapors. They are commonly used in applications where both liquid and gas handling is required, such as in chemical processing, wastewater treatment, and oil refining.

5. Variable Pitch Screw Vacuum Pumps:

Variable pitch screw vacuum pumps feature rotors with varying helical pitches along their length. This design allows for better optimization of the compression process and improved efficiency. Variable pitch screw vacuum pumps are often used in applications that require a wide operating range and high efficiency, such as in semiconductor manufacturing, research laboratories, and vacuum coating processes.

6. Oil-Injected Screw Vacuum Pumps:

Oil-injected screw vacuum pumps utilize injected oil as a sealing and lubricating medium. The oil creates a seal between the rotors and housing and provides lubrication to minimize friction. These pumps are commonly used in industrial applications where a higher level of vacuum is required, such as in power plants, chemical processes, and central vacuum systems.

7. Oil-Free Screw Vacuum Pumps:

Oil-free screw vacuum pumps are designed to operate without the use of any lubricating oil or fluid. These pumps employ alternative methods, such as dry running or the use of non-contacting technologies, to achieve the necessary sealing and lubrication. Oil-free screw vacuum pumps are favored in applications where oil contamination is a concern, such as in electronics manufacturing, pharmaceutical production, and food processing.

These are just a few examples of the different types of screw vacuum pumps available in the market. The choice of the most suitable type depends on specific application requirements, desired vacuum levels, process conditions, and industry standards.

China Professional Air Cooled Screw Vacuum Pumps for Lectronics, Metallurgy, Chemical, Food, Machinery, Medicine, Aerospace and Other Departments   vacuum pump for ac	China Professional Air Cooled Screw Vacuum Pumps for Lectronics, Metallurgy, Chemical, Food, Machinery, Medicine, Aerospace and Other Departments   vacuum pump for ac
editor by CX 2024-04-03

China manufacturer Air Cooled Screw Vacuum Pumps for Cosmetics and Sanitary Products, Soap and Synthetic Detergent with Good quality

Product Description

 

Product Description

Dry screw vacuum pump, is the use of a pair of screw, made in the pump shell synchronous high-speed reverse rotation of the effects of the suction and exhaust and suction device, 2 screw fine dynamic balancing correction, and is supported by bearings, is installed in the pump shell, between screw and screw has a certain gap, so the pump work, no friction between each other, smooth running, low noise, Working chamber without lubricating oil, therefore, dry screw pump can remove a lot of steam and a small amount of dust gas occasions, higher limit vacuum, lower power consumption, energy saving, maintenance-free and other advantages.Dry Oil-Free Air Cooling Screw Vacuum Pump ,This is an advanced and widely used vacuum pump at present, It is 1 of the best-selling products of our company.
 It adopts explosion-proof motor with high configuration, It has the characteristics of low noise, no oil and pollution, clean and high vacuum, simple and convenient use, operation and maintenance, Widely used in many industries, For example, oil and gas recovery, vacuum coating, biomedicine, food processing, single crystal furnace, vacuum forming, vacuum melting, electronic photovoltaic, semiconductor synthesis and many other industries are used.
The dry oil-free screw vacuum pump produced by our company is divided into air cooling and water cooling according to the extraction rate, and there are many models for you to choose.

Our Advantages

There is no medium in the working chamber, which can obtain a clean vacuum.
. No clearance between rotating parts, high speed operation, small overall volume.

There is no compression in the gas, suitable for extraction of coagulable gas.

Can remove a lot of steam and a small amount of dust gas occasions.
. High vacuum, the ultimate vacuum up to 1 Pa.

Screw material is high strength special material, material density, wear resistance, stable performance.

No friction rotating parts, low noise.
. Simple structure, convenient maintenance.
Wider range of use: corrosive environment can be used.

No oil consumption, no water.

Pump gas directly discharged from the pump body, no pollution of water, no environmental pressure, more convenient gas recovery.

It can be composed of oil-free unit with Roots pump and molecular pump.

 

Typical Use

——Oil and gas recovery.    ——Biological medicine ——Food Processing —— Single crystal furnace
——Vacuum forming ——Vacuum flame refining ——Electronic photovoltaic. ——Semiconductor synthesis

Product Parameters

 Air cooling   Dry screw vacuum pump

Type
(Air cooled series)
 Basic parameters 
Pumping speed
(m3/h)
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
(mm)
outlet caliber (mm) Pump head weight
(kg)
noise dB(A) Overall dimension
(length*width*height)
(mm)
LG-10 10 ≤5 0.75 2730 KF16 KF16 30 ≤ 72 655x260x285
LG-20 20 ≤5 1.1 2840 KF25 KF25 55 ≤72 720x305x370
LG-50 50 ≤10 2.2 2850 KF40 KF40 90 ≤75 920x350x420
LG-70 70 ≤30 3 2850 KF40 KF40 110 ≤75 910x390x460
LG-90 90 ≤30 4 2870 KF50 KF50 125 ≤80 1000x410x495

Water cooling Dry screw vacuum pump

 

Type                                                                             Basic parameters
Pumping speed
m3/h
Presure limit(Pa)  Power (kW)  revolution (rpm) Inlet caliber
mm
outlet caliber mm Cooling water volume
L/min
noise dB(A) Overall dimension
(length*width*height)
mm
LGV-180 180 5 4 2900 40 40 2 < 78 1157x375x734
LGV-250 250 5 5.5 2900 50 40 5.5 <78 1462x417x820
LGV-360 360 5 7.5 2900 50 40 4 W78 1462x455x820
LGV-540 540 5 11 2900 65 50 8 W80 1578x543x860
LGV-720 720 5 15 2900 80 65 10 <80 1623x562x916
LGV-1100 1100 5 22 2900 100 80 14 w 80 1866x598x1050
LG V-1800 1800 5 37 2900 150 100 20 w 80 2092×951 x 1150

Characteristic Curve

 Air cooling   Dry screw vacuum pumpWater cooling Dry screw vacuum pump

Detailed Photos

Vacuum pumps are used in chemical plants

General Manager Speech

Deeply cultivate the vacuum technology, and research,develop and manufacture the vacuum equipment to provide the best solution in the vacuum field and make the vacuum application easier.

Company Profile

ZheJiang Kaien Vacuum Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and operation of vacuum equipment. The company has strong technical force, excellent equipment and considerate after-sales service. The product manufacturing process is managed in strict accordance with IS09001 quality system. It mainly produces and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum unit and other vacuum systems.

 New plant plHangZhou

The company’s products have been for a number of food, medicine, refrigeration, drying plants and a number of transformer related equipment manufacturers for vacuum equipment. The products are widely used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas recovery, etc.

High precision machining equipment

The company cooperates with many scientific research institutions and universities, such as ZheJiang University, China University of petroleum, ZheJiang Institute of mechanical design, etc.with colleges and universities to research and develop core technologies, and owns dozens of independent intellectual property patents.Our technology is leading, the product quality is stable, the product has a good reputation in China’s domestic market, is sold all over the country, and is exported to Europe, America, Africa, the Middle East and Southeast Asia,We adhering to the basic tenet of quality, reputation and service, the company takes leading-edge technology of vacuum pump as its own responsibility, and wholeheartedly serves customers of vacuum equipment application in various industries with rigorous working attitude and professional working style.

Product quality wins consumer cooperation

In shipment

 ISO 9001Certificate of hi-tech Enterprise

 

Welcome to send your needs, we will provide you with the best service,

provide the greatest help!!! 

 

Warranty: One Year
Oil or Not: Oil Free
Structure: Screw
Exhauster Method: Entrapment Vacuum Pump
Vacuum Degree: High Vacuum
Work Function: Mainsuction Pump
Customization:
Available

|

screw vane pump

Are there energy-efficient options for screw vacuum pumps?

Yes, there are energy-efficient options available for screw vacuum pumps. Here’s a detailed explanation of energy-efficient features and technologies that can be found in screw vacuum pumps:

1. Variable Frequency Drives (VFD):

Screw vacuum pumps equipped with Variable Frequency Drives (VFD) offer energy efficiency by allowing precise control of the pump’s rotational speed. VFDs adjust the motor speed according to the required vacuum level, resulting in reduced energy consumption compared to fixed-speed pumps. By matching the pump’s speed to the process demands, VFDs help optimize energy usage and minimize unnecessary energy losses.

2. High-Efficiency Motors:

Energy-efficient screw vacuum pumps often incorporate high-efficiency motors. These motors are designed to minimize energy losses and improve overall efficiency. High-efficiency motors typically comply with international efficiency standards, such as the International Electrotechnical Commission (IEC) standards or the National Electrical Manufacturers Association (NEMA) standards, and are classified with high efficiency ratings, such as IE3 or NEMA Premium.

3. Advanced Control Systems:

Modern screw vacuum pumps may feature advanced control systems that optimize energy consumption. These systems utilize intelligent algorithms to monitor and adjust the pump’s operation based on real-time process conditions. By continuously assessing the demand for vacuum and adapting the pump’s performance accordingly, advanced control systems help reduce energy waste and improve overall energy efficiency.

4. Energy Recovery Systems:

Some screw vacuum pumps are equipped with energy recovery systems that capture and utilize energy that would otherwise be wasted. These systems can include heat exchangers or energy regeneration units that repurpose excess heat from the pump’s operation. By utilizing this recovered energy for other processes, such as preheating or heating applications, energy recovery systems contribute to increased overall system efficiency.

5. Optimized Pump Design:

Manufacturers continuously work on optimizing the design of screw vacuum pumps to improve energy efficiency. This can involve reducing internal friction, optimizing rotor profiles, and minimizing leakage paths. These design enhancements aim to maximize the pump’s performance while minimizing energy losses, resulting in improved overall energy efficiency.

6. Energy Monitoring and Analysis:

Energy-efficient screw vacuum pumps often come with built-in energy monitoring and analysis features. These systems allow operators to monitor the energy consumption of the pump in real-time and analyze energy usage patterns. By identifying energy-intensive periods or inefficiencies, operators can make informed decisions to optimize the pump’s operation and further improve energy efficiency.

7. Energy Efficiency Certifications:

Energy-efficient screw vacuum pumps may carry energy efficiency certifications or labels, such as the ENERGY STAR® certification or the European Union’s Energy Efficiency Directive compliance. These certifications provide reassurance that the pump has undergone testing and meets specific energy efficiency criteria, providing confidence in its energy-saving capabilities.

In summary, energy-efficient options for screw vacuum pumps exist and incorporate features such as Variable Frequency Drives (VFD), high-efficiency motors, advanced control systems, energy recovery systems, optimized pump design, energy monitoring and analysis capabilities, and energy efficiency certifications. By utilizing these energy-efficient options, industries can reduce energy consumption, lower operating costs, and minimize their environmental impact.

screw vane pump

What is the range of vacuum levels that screw vacuum pumps can achieve?

Screw vacuum pumps are capable of achieving a wide range of vacuum levels, depending on the specific design and operating characteristics of the pump. Here is a detailed explanation of the typical range of vacuum levels that screw vacuum pumps can achieve:

1. Low Vacuum:

Screw vacuum pumps can operate in the low vacuum range, typically defined as vacuum levels between atmospheric pressure (760 torr) and around 1 torr. In this range, screw vacuum pumps can efficiently handle applications that require moderate vacuum levels, such as packaging, drying processes, and general industrial applications.

2. Medium Vacuum:

Screw vacuum pumps are also suitable for medium vacuum applications, which typically range from about 1 torr down to approximately 10^-3 torr (or 0.001 torr). In this range, screw vacuum pumps offer reliable performance and can be used in various industries and processes, including chemical processing, vacuum distillation, freeze drying, and composite manufacturing.

3. High Vacuum:

While screw vacuum pumps are not typically used for achieving ultra-high vacuum levels, they can still operate in the high vacuum range. High vacuum is generally defined as vacuum levels below 10^-3 torr (or 0.001 torr) down to around 10^-6 torr (or 0.000001 torr). Screw vacuum pumps can be employed in high vacuum applications where slightly higher pressures are acceptable, such as in research laboratories, vacuum coating, and some semiconductor manufacturing processes.

It’s important to note that the achievable vacuum levels may vary depending on factors such as the specific design and size of the screw vacuum pump, the gas composition being pumped, system conductance, and the presence of any leaks or contaminants in the vacuum system. Additionally, the performance of a screw vacuum pump may also be influenced by the process conditions and the specific application requirements.

In summary, screw vacuum pumps can achieve vacuum levels ranging from low vacuum (around 1 torr) to medium vacuum (down to approximately 10^-3 torr) and can also operate in the high vacuum range (below 10^-3 torr). The appropriate range of vacuum level for a specific application should be determined based on the process requirements, industry standards, and the capabilities of the screw vacuum pump.

screw vane pump

What are the advantages of using a screw vacuum pump in industrial processes?

Using a screw vacuum pump in industrial processes offers several advantages, making it a preferred choice for various applications. Here are some key advantages:

  • High Efficiency: Screw vacuum pumps are known for their high efficiency in handling large volumes of gas or vapor. They operate based on positive displacement, ensuring consistent performance regardless of pressure differentials. This high volumetric efficiency allows for faster evacuation and quicker process cycles, increasing overall productivity.
  • Wide Operating Range: Screw vacuum pumps are capable of maintaining stable vacuum levels across a wide range of pressures. They can achieve both low and high vacuum levels, making them versatile for different industrial processes. This wide operating range enables their use in applications that require precise control of vacuum levels.
  • Continuous Operation: Screw vacuum pumps are designed for continuous operation without the need for frequent shutdowns or maintenance. They can handle demanding industrial processes that require sustained vacuum levels for extended periods. This continuous operation improves productivity and reduces downtime.
  • Reliability and Durability: Screw vacuum pumps are known for their reliability and robust construction. They are designed to withstand harsh operating conditions, including high temperatures, corrosive environments, and heavy-duty applications. Their durable design and materials ensure long service life and minimal maintenance requirements.
  • Low Noise Levels: Screw vacuum pumps generally produce lower noise levels compared to other types of vacuum pumps. This feature is particularly beneficial in industrial settings where noise reduction is important for the comfort and safety of workers.
  • Ability to Handle Wet and Dirty Gases: Screw vacuum pumps can handle wet and dirty gases effectively without compromising performance. They are designed to handle condensable vapors, particulates, and liquid carryover, which makes them suitable for applications where the gas or vapor may contain contaminants.
  • Reduced Environmental Impact: Screw vacuum pumps often incorporate energy-efficient designs, resulting in reduced power consumption and lower operating costs. Additionally, some models may include features such as oil-free operation, which eliminates the need for lubricating oil and reduces the environmental impact.
  • Application Versatility: Screw vacuum pumps find applications in a wide range of industries, including chemical processing, pharmaceuticals, food and beverage, power generation, electronics manufacturing, and more. They are capable of handling various gases and vapors, making them adaptable to different industrial processes.

Overall, the advantages of using a screw vacuum pump in industrial processes include high efficiency, wide operating range, continuous operation, reliability, low noise levels, ability to handle wet and dirty gases, reduced environmental impact, and application versatility. These factors contribute to improved productivity, cost savings, and enhanced process control, making screw vacuum pumps a popular choice in many industrial settings.

China manufacturer Air Cooled Screw Vacuum Pumps for Cosmetics and Sanitary Products, Soap and Synthetic Detergent   with Good quality China manufacturer Air Cooled Screw Vacuum Pumps for Cosmetics and Sanitary Products, Soap and Synthetic Detergent   with Good quality
editor by CX 2023-12-05

China factory Screw Vacuum Pump for Electronics Industry and Semiconductor Industry vacuum pump oil near me

Product Description

                                       EXTERIOR DESIGN                                                                INTERIOR DESIGN

ZheJiang CHINAMFG Machinery Manufacturing Co. , Ltd. is located in HangZhou, ZheJiang .CHINAMFG is a comprehensive screw air compressor

manufacturer that engaged in R & D, design, production and sales. It has a plant of 20,000 square meters, including a large production workshop,

a comprehensive first-class exhibition hall and a testing laboratory.

Dukas has excellent mechanical engineering designers, an experienced staff team and a professional management team. The production

concept focuses on energy-saving and is committed to perfecting and improving the technological process in order to get the core technology

of super frequency energy-saving, achieving the characteristics of mute, durability, power saving and safety.

The company has 9 series of products with multiple models. Including Fixed speed air compressor, PM VSD air compressor, PM VSD

two-stage air compressor, 4-in-1 air compressor, Oil free water lubrcating air compressor, Diesel portable screw air compressor, Electric

portable screw air compressor, Air dryer, Adsorption machine and the matching spare parts. CHINAMFG adheres to the business philosophy of

cooperation and mutual benefit to provide a one-stop service for every customer!

Dukas air compressors not only cover the domestic market but also are exported to more than 20 countries and regions such as South

Africa, Australia, Thailand, Russia, Argentina, Canada and so on. CHINAMFG products have won a good reputation from users for their excellent

quality and style. The company has always adhered to the concept of quality first, service first and dedication to providing every customer with

excellent products and meticulous after-sales service!

Dukas warmly welcome customers to visit our factory and establish a wide range of cooperation!

Frequency Asked Question:

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our Factory is Located in Xihu (West Lake) Dis. CountyHangZhou CityZheJiang  Province, China.

Q3: Will you provide spare parts of your products? 
A3: Yes, We provide all parts to customer, so you can do repair or maintenance without trouble.

Q4: Can you accept OEM orders? 
A4: Yes, with professional design team, OEM orders are highly welcome.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: Warranty terms of your machine?
A6Two years warranty for the machine and technical support always according to your needs.

Q7: Can you provide the best price?
A7:According to your order, we will provide you the best price.

After-sales Service: 24 Hours
Warranty: 1 Year, 2 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

screw vane pump

What is the typical lifespan of a screw vacuum pump?

The typical lifespan of a screw vacuum pump can vary depending on various factors, including the quality of the pump, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation of the factors that can influence the lifespan of a screw vacuum pump:

1. Quality and Design:

The quality and design of the screw vacuum pump play a significant role in its lifespan. High-quality pumps manufactured by reputable companies tend to have longer lifespans compared to lower-quality or poorly designed pumps. Pumps with robust construction, durable materials, and reliable components are more likely to withstand the rigors of operation and have an extended service life.

2. Maintenance Practices:

Proper maintenance is crucial for maximizing the lifespan of a screw vacuum pump. Regular maintenance activities, such as lubrication, inspection, and cleaning, help ensure the pump operates optimally and minimizes wear and tear. Following the manufacturer’s recommended maintenance schedule, using the correct lubricants, and addressing any issues promptly can significantly extend the pump’s lifespan.

3. Operating Conditions:

The operating conditions in which the screw vacuum pump is used can impact its lifespan. Factors such as temperature, pressure, humidity, and the presence of corrosive or abrasive substances can affect the pump’s performance and longevity. Pumps designed for specific operating conditions or equipped with protective measures, such as coatings or corrosion-resistant materials, may have an extended lifespan in challenging environments.

4. Usage Patterns:

The usage patterns of the screw vacuum pump also influence its lifespan. Factors such as duty cycle, operating hours, and load variations can impact the wear and tear on the pump’s components. Pumps subjected to continuous or heavy-duty usage may experience more significant wear and have a shorter lifespan compared to pumps used intermittently or under lighter loads.

5. Maintenance and Repair History:

The maintenance and repair history of the screw vacuum pump can provide insights into its lifespan. Pumps that have been well-maintained, with regular servicing, timely repairs, and component replacements as needed, are more likely to have longer lifespans. Conversely, pumps that have a history of neglected maintenance or frequent breakdowns may have reduced lifespans.

6. Technological Advancements:

The ongoing advancements in screw vacuum pump technology can also impact the lifespan of pumps. Newer generations of pumps may incorporate improved designs, materials, and components that enhance reliability and durability. Pumps featuring advanced monitoring and diagnostic capabilities can help detect and address potential issues before they escalate, thus prolonging the pump’s lifespan.

It is important to note that the typical lifespan of a screw vacuum pump can range from several years to several decades, depending on the aforementioned factors. While some pumps may require replacement after a decade or so of service, well-maintained pumps operating in favorable conditions can exceed 20 years of reliable operation.

Ultimately, to determine the specific lifespan of a screw vacuum pump, it is advisable to consult the manufacturer’s guidelines, consider the operating conditions, and implement a proactive maintenance program to ensure optimal performance and longevity.

screw vane pump

Can screw vacuum pumps be used for vacuum packaging and sealing processes?

Yes, screw vacuum pumps can be used for vacuum packaging and sealing processes. Screw vacuum pumps offer several advantages that make them suitable for these applications. Here’s a detailed explanation:

1. Efficient Evacuation:

Screw vacuum pumps are known for their high pumping speed, which allows them to quickly evacuate the packaging chamber. By removing air and other gases from the packaging environment, screw vacuum pumps create the necessary vacuum conditions for packaging and sealing processes.

2. Consistent Vacuum Levels:

Screw vacuum pumps are capable of maintaining consistent vacuum levels throughout the packaging and sealing process. This is important to ensure reliable and uniform packaging results. The stable vacuum levels achieved by screw vacuum pumps help preserve product quality, extend shelf life, and prevent spoilage or degradation of packaged goods.

3. Control and Automation:

Screw vacuum pumps can be easily integrated into packaging and sealing systems, allowing for precise control and automation of the vacuum process. They can be equipped with sensors, controllers, and programmable logic controllers (PLCs) to monitor and adjust the vacuum levels, packaging parameters, and sealing operations. This enables efficient and repeatable packaging processes.

4. Versatility:

Screw vacuum pumps are versatile and can handle a wide range of packaging materials, including flexible pouches, bags, trays, and rigid containers. They can accommodate different sizes and shapes of packaging, making them suitable for various industries such as food and beverage, pharmaceuticals, electronics, and consumer goods.

5. Oil-Free Operation:

Many screw vacuum pumps are designed to operate without the use of lubricating oil or fluids. This oil-free operation eliminates the risk of oil contamination in the packaging process, making them particularly suitable for applications where cleanliness and hygiene are crucial, such as in the food industry or medical packaging.

6. Reliability and Durability:

Screw vacuum pumps are known for their robust construction and reliable performance. They are designed to handle continuous operation and can withstand the demanding conditions of packaging and sealing processes, including frequent start-stop cycles and exposure to moisture, dust, or other contaminants.

7. Cost-Effectiveness:

Using screw vacuum pumps for vacuum packaging and sealing processes can be cost-effective in the long run. They offer energy-efficient operation, low maintenance requirements, and long service life, resulting in reduced operating costs and improved productivity.

In summary, screw vacuum pumps are well-suited for vacuum packaging and sealing processes. Their efficient evacuation capabilities, ability to maintain consistent vacuum levels, control and automation features, versatility, oil-free operation, reliability, and cost-effectiveness make them a valuable choice for a wide range of industries that require vacuum packaging and sealing of products.

screw vane pump

What are the advantages of using a screw vacuum pump in industrial processes?

Using a screw vacuum pump in industrial processes offers several advantages, making it a preferred choice for various applications. Here are some key advantages:

  • High Efficiency: Screw vacuum pumps are known for their high efficiency in handling large volumes of gas or vapor. They operate based on positive displacement, ensuring consistent performance regardless of pressure differentials. This high volumetric efficiency allows for faster evacuation and quicker process cycles, increasing overall productivity.
  • Wide Operating Range: Screw vacuum pumps are capable of maintaining stable vacuum levels across a wide range of pressures. They can achieve both low and high vacuum levels, making them versatile for different industrial processes. This wide operating range enables their use in applications that require precise control of vacuum levels.
  • Continuous Operation: Screw vacuum pumps are designed for continuous operation without the need for frequent shutdowns or maintenance. They can handle demanding industrial processes that require sustained vacuum levels for extended periods. This continuous operation improves productivity and reduces downtime.
  • Reliability and Durability: Screw vacuum pumps are known for their reliability and robust construction. They are designed to withstand harsh operating conditions, including high temperatures, corrosive environments, and heavy-duty applications. Their durable design and materials ensure long service life and minimal maintenance requirements.
  • Low Noise Levels: Screw vacuum pumps generally produce lower noise levels compared to other types of vacuum pumps. This feature is particularly beneficial in industrial settings where noise reduction is important for the comfort and safety of workers.
  • Ability to Handle Wet and Dirty Gases: Screw vacuum pumps can handle wet and dirty gases effectively without compromising performance. They are designed to handle condensable vapors, particulates, and liquid carryover, which makes them suitable for applications where the gas or vapor may contain contaminants.
  • Reduced Environmental Impact: Screw vacuum pumps often incorporate energy-efficient designs, resulting in reduced power consumption and lower operating costs. Additionally, some models may include features such as oil-free operation, which eliminates the need for lubricating oil and reduces the environmental impact.
  • Application Versatility: Screw vacuum pumps find applications in a wide range of industries, including chemical processing, pharmaceuticals, food and beverage, power generation, electronics manufacturing, and more. They are capable of handling various gases and vapors, making them adaptable to different industrial processes.

Overall, the advantages of using a screw vacuum pump in industrial processes include high efficiency, wide operating range, continuous operation, reliability, low noise levels, ability to handle wet and dirty gases, reduced environmental impact, and application versatility. These factors contribute to improved productivity, cost savings, and enhanced process control, making screw vacuum pumps a popular choice in many industrial settings.

China factory Screw Vacuum Pump for Electronics Industry and Semiconductor Industry   vacuum pump oil near me		China factory Screw Vacuum Pump for Electronics Industry and Semiconductor Industry   vacuum pump oil near me
editor by CX 2023-11-24

China high quality 2 stage Rotary Screw Vacuum Pump for DS Engine and Fabrication a/c vacuum pump

Product Description

DS Series Dry Screw Vacuum Pump 

Features

1.Exhaust Path Is Short, Reduce The Deposition Of Reactants.
Comparing with other types of dry vacuum pump,DENAIR screw vacuum pump has the shortest gas path in the vacuum pump and that could reduce the contamination of process gas. Screw rotors can play as a powder transmission mechanism,we runs well even there has lots of contamination inside the pump.

2.The Optimal Linear Sealing, The Pump Performance.
Patented rotor profile can provide rotor excellent sealing effects thus a larger clearance is allowable in between.Pump rotor wesring and rotor jam by the process contamination can be reduced by larger allowable clearcance.

3.Simple Structure, Low Fault Rate And Easy Maintenance
Screw type vacuum is composed by a pair of screw rotor and isolation plates are required in different between rotors and isolation plates can also be avoided.Overhaul CHINAMFG dry pump is much easier than other type of dry pump,so the erpair time is shorter and the cost is saver.

4.Microcomputer Operation, Remote Monitoring, Considerate Protection
Microprocessor controller provides lots of pump parameters for running status monitoring.Pump can be easily operated and monitored by the operation panel.Remote control software can help the customer monitor the pump running status remotely.

DS Vacuum Pump Speed Curve

Advantages

1.Special cooling liquid cooling, to avoid the cooling water may cause corrosion to the hull. 

2.Mobile operation interface, convenient operation; Display and the actual work of vacuum pump and can be selected to both languages, according to the real close to the customer.

3.Catch the power connector, safe and convenient.

4.The nitrogen gas heater, make the vacuum pump is more suitable for CVD, PECVD and other semiconductor technique process.
5.The control signals and communication signal interface, remote monitoring was carried out on the vacuum. 

Application

1.The health care industry.

2.Lighting industry.

3.A variety of analytical instruments.

4.Electronics, semiconductor industry. 

5.The power industry.

6.Refrigeration industry.

Technical Prameters

Type Unit DS180 DS250 DS360 DS540 DS720
50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Pumping speed m3/hr 180 216 250 3, China
And our factory is located in No.386,YangzhuangBang Street,Pingxing Rd.,Xindai Town,HangZhou,ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.

 

Oil or Not: Oil Free
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: Vacuum
Work Function: Pre-Suction Pump
Working Conditions: Dry
Customization:
Available

|

screw vane pump

Can screw vacuum pumps be used in food processing and packaging industries?

Yes, screw vacuum pumps can be used in food processing and packaging industries. Here’s a detailed explanation of their suitability and applications in these industries:

1. Vacuum Packaging:

Screw vacuum pumps are commonly used in vacuum packaging applications within the food industry. Vacuum packaging helps extend the shelf life of food products by removing air from the packaging, reducing spoilage, and preserving freshness. Screw vacuum pumps create the necessary vacuum environment by efficiently evacuating air from the packaging containers or bags. Their oil-free operation ensures that there is no risk of oil contamination in the packaged food, making them ideal for maintaining food quality and safety standards.

2. Food Processing:

Screw vacuum pumps are also suitable for various food processing applications. They can be used in processes such as deaeration, freeze drying, and evaporation. In deaeration processes, screw vacuum pumps efficiently remove air and gases from food mixtures, improving the quality and texture of the final product. In freeze drying, screw vacuum pumps facilitate the removal of moisture from frozen food products, preserving their nutritional value and extending their shelf life. Similarly, in evaporation processes, screw vacuum pumps help create the necessary vacuum conditions for concentrating liquids and reducing their volume, such as in the production of fruit juices or dairy products.

3. Sanitary Design:

Screw vacuum pumps designed for food processing and packaging industries often incorporate sanitary features to meet strict hygiene standards. These pumps are constructed with materials that are resistant to corrosion and can withstand frequent cleaning and sterilization processes. They may also have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles or bacteria. Sanitary design ensures compliance with food safety regulations and facilitates easy cleaning, reducing the risk of contamination and ensuring the integrity of the food products.

4. Contamination Prevention:

The oil-free operation of screw vacuum pumps is particularly advantageous in food processing and packaging industries. Since oil-free pumps eliminate the risk of oil contamination, they are suitable for processes where maintaining the purity and quality of food products is critical. Oil contamination can affect the taste, odor, and overall quality of food items. By using oil-free screw vacuum pumps, manufacturers can ensure that their products remain uncontaminated and meet the required food safety standards.

5. Efficiency and Reliability:

Screw vacuum pumps are known for their efficiency and reliability. They offer consistent performance and can handle varying load demands effectively. This is beneficial in food processing and packaging industries, where the production volumes can vary, and reliable vacuum generation is crucial. The robust design and low maintenance requirements of screw vacuum pumps contribute to their overall reliability, minimizing downtime and ensuring continuous operation in food processing and packaging facilities.

6. Compliance with Regulations:

Screw vacuum pumps designed for food processing and packaging industries are often manufactured to comply with relevant regulations and standards. These pumps may adhere to guidelines such as the Food and Drug Administration (FDA) regulations or the European Hygienic Engineering and Design Group (EHEDG) standards. Compliance with these regulations ensures that the equipment meets the necessary hygiene and safety requirements for food processing and packaging applications.

In summary, screw vacuum pumps can be effectively used in food processing and packaging industries. Their applications include vacuum packaging, food processing processes like deaeration, freeze drying, and evaporation. With their sanitary design, contamination prevention capabilities, efficiency, reliability, and compliance with regulations, screw vacuum pumps offer reliable and safe vacuum solutions for the food industry.

screw vane pump

Can screw vacuum pumps be used for vacuum packaging and sealing processes?

Yes, screw vacuum pumps can be used for vacuum packaging and sealing processes. Screw vacuum pumps offer several advantages that make them suitable for these applications. Here’s a detailed explanation:

1. Efficient Evacuation:

Screw vacuum pumps are known for their high pumping speed, which allows them to quickly evacuate the packaging chamber. By removing air and other gases from the packaging environment, screw vacuum pumps create the necessary vacuum conditions for packaging and sealing processes.

2. Consistent Vacuum Levels:

Screw vacuum pumps are capable of maintaining consistent vacuum levels throughout the packaging and sealing process. This is important to ensure reliable and uniform packaging results. The stable vacuum levels achieved by screw vacuum pumps help preserve product quality, extend shelf life, and prevent spoilage or degradation of packaged goods.

3. Control and Automation:

Screw vacuum pumps can be easily integrated into packaging and sealing systems, allowing for precise control and automation of the vacuum process. They can be equipped with sensors, controllers, and programmable logic controllers (PLCs) to monitor and adjust the vacuum levels, packaging parameters, and sealing operations. This enables efficient and repeatable packaging processes.

4. Versatility:

Screw vacuum pumps are versatile and can handle a wide range of packaging materials, including flexible pouches, bags, trays, and rigid containers. They can accommodate different sizes and shapes of packaging, making them suitable for various industries such as food and beverage, pharmaceuticals, electronics, and consumer goods.

5. Oil-Free Operation:

Many screw vacuum pumps are designed to operate without the use of lubricating oil or fluids. This oil-free operation eliminates the risk of oil contamination in the packaging process, making them particularly suitable for applications where cleanliness and hygiene are crucial, such as in the food industry or medical packaging.

6. Reliability and Durability:

Screw vacuum pumps are known for their robust construction and reliable performance. They are designed to handle continuous operation and can withstand the demanding conditions of packaging and sealing processes, including frequent start-stop cycles and exposure to moisture, dust, or other contaminants.

7. Cost-Effectiveness:

Using screw vacuum pumps for vacuum packaging and sealing processes can be cost-effective in the long run. They offer energy-efficient operation, low maintenance requirements, and long service life, resulting in reduced operating costs and improved productivity.

In summary, screw vacuum pumps are well-suited for vacuum packaging and sealing processes. Their efficient evacuation capabilities, ability to maintain consistent vacuum levels, control and automation features, versatility, oil-free operation, reliability, and cost-effectiveness make them a valuable choice for a wide range of industries that require vacuum packaging and sealing of products.

screw vane pump

What are the different types of screw vacuum pumps available in the market?

There are several different types of screw vacuum pumps available in the market, each with its own design and operating characteristics. Here are some of the commonly used types of screw vacuum pumps:

1. Single-Stage Screw Vacuum Pumps:

Single-stage screw vacuum pumps consist of a single pair of intermeshing screws (rotors) that rotate to create vacuum. These pumps are commonly used for low to medium vacuum applications and can achieve a wide range of vacuum levels. Single-stage screw vacuum pumps are known for their compact design, high pumping speed, and efficient operation.

2. Multi-Stage Screw Vacuum Pumps:

Multi-stage screw vacuum pumps consist of multiple stages, each with its own pair of intermeshing screws. The gas or vapor is sequentially compressed and evacuated through multiple stages, allowing for higher vacuum levels to be achieved. Multi-stage screw vacuum pumps are suitable for applications requiring deeper vacuum levels, such as in chemical processing, power generation, and semiconductor manufacturing.

3. Dry Screw Vacuum Pumps:

Dry screw vacuum pumps operate without the use of any lubricating fluid in the pumping chamber. These pumps rely on tight clearances between the rotors and housing to create a seal and achieve vacuum. Dry screw vacuum pumps are preferred in applications where oil contamination or the presence of lubricating fluids is undesirable, such as in the electronics, pharmaceutical, and food processing industries.

4. Liquid Ring Screw Vacuum Pumps:

Liquid ring screw vacuum pumps combine the principles of liquid ring vacuum pumps and screw vacuum pumps. These pumps use a liquid ring as the sealing and compression medium, while the screws provide the positive displacement action. Liquid ring screw vacuum pumps are known for their capability to handle wet processes and carryover of liquid or condensable vapors. They are commonly used in applications where both liquid and gas handling is required, such as in chemical processing, wastewater treatment, and oil refining.

5. Variable Pitch Screw Vacuum Pumps:

Variable pitch screw vacuum pumps feature rotors with varying helical pitches along their length. This design allows for better optimization of the compression process and improved efficiency. Variable pitch screw vacuum pumps are often used in applications that require a wide operating range and high efficiency, such as in semiconductor manufacturing, research laboratories, and vacuum coating processes.

6. Oil-Injected Screw Vacuum Pumps:

Oil-injected screw vacuum pumps utilize injected oil as a sealing and lubricating medium. The oil creates a seal between the rotors and housing and provides lubrication to minimize friction. These pumps are commonly used in industrial applications where a higher level of vacuum is required, such as in power plants, chemical processes, and central vacuum systems.

7. Oil-Free Screw Vacuum Pumps:

Oil-free screw vacuum pumps are designed to operate without the use of any lubricating oil or fluid. These pumps employ alternative methods, such as dry running or the use of non-contacting technologies, to achieve the necessary sealing and lubrication. Oil-free screw vacuum pumps are favored in applications where oil contamination is a concern, such as in electronics manufacturing, pharmaceutical production, and food processing.

These are just a few examples of the different types of screw vacuum pumps available in the market. The choice of the most suitable type depends on specific application requirements, desired vacuum levels, process conditions, and industry standards.

China high quality 2 stage Rotary Screw Vacuum Pump for DS Engine and Fabrication   a/c vacuum pump		China high quality 2 stage Rotary Screw Vacuum Pump for DS Engine and Fabrication   a/c vacuum pump
editor by CX 2023-11-18

China best Conveying Dry Screw Vacuum Pumps vacuum pump and compressor

Product Description

>DS450 Dry Screw Vacuum Pumps

  • Complete series with pumping capacity of 120 to 4000 m3/h
  • Optimal ultimate pressure and broadest range of applications
  • Completely dry and oil-free
  • High pumping speed at atmospheric pressure reduces the pump-down time
  • Water cooling with temperature monitoring
  • Saving energy costs through internal compression
  • Wear-free dynamic seal
  • Direct gas flow and optimized temperature profile minimize deposits
  • Low energy consumption, low noise level
  • Extensive range of accessories
Technique data Unit DS0450
Rated flow rate m3/h 450
m3/min 7.5
L/S 125
Ultimate pressure Torr 6×10-3
mbar 0.8×10-2
Pa 0.8
Motor power kw 11
Motor speed rpm 2900/3500
Noise dB(A) 75
Inlet port mm 80
Outlet port mm 65
Volume of cooling water L 10~15
Temperature ºC 0-50
Operating humidity RH 90%

Applications

Distillation (normal, short path & molecular)
Drying (filter, freeze, and transformer drying)
Evaporation
Filtration
House vacuum (central or general/laboratory vacuum service, pilot plants)
Reactor service
Solvent recovery (fuel vapor)
Sterilization (ethylene oxide)
Problem gasses (flammable, low auto-ignition temperatures, corrosive gasses, and hydrogen)
Conveying

Additional Applications Include
Crystallization 
Deodorization 
Degassing 
Desorption 
Fluid handling 
Impregnation
Pervaporation 
Polymerization 
 

Oil or Not: Oil Free
Structure: Dry Screw Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: Vacuum
Work Function: Dry Screw Pump
Working Conditions: Dry
Customization:
Available

|

screw vane pump

Are there energy-efficient options for screw vacuum pumps?

Yes, there are energy-efficient options available for screw vacuum pumps. Here’s a detailed explanation of energy-efficient features and technologies that can be found in screw vacuum pumps:

1. Variable Frequency Drives (VFD):

Screw vacuum pumps equipped with Variable Frequency Drives (VFD) offer energy efficiency by allowing precise control of the pump’s rotational speed. VFDs adjust the motor speed according to the required vacuum level, resulting in reduced energy consumption compared to fixed-speed pumps. By matching the pump’s speed to the process demands, VFDs help optimize energy usage and minimize unnecessary energy losses.

2. High-Efficiency Motors:

Energy-efficient screw vacuum pumps often incorporate high-efficiency motors. These motors are designed to minimize energy losses and improve overall efficiency. High-efficiency motors typically comply with international efficiency standards, such as the International Electrotechnical Commission (IEC) standards or the National Electrical Manufacturers Association (NEMA) standards, and are classified with high efficiency ratings, such as IE3 or NEMA Premium.

3. Advanced Control Systems:

Modern screw vacuum pumps may feature advanced control systems that optimize energy consumption. These systems utilize intelligent algorithms to monitor and adjust the pump’s operation based on real-time process conditions. By continuously assessing the demand for vacuum and adapting the pump’s performance accordingly, advanced control systems help reduce energy waste and improve overall energy efficiency.

4. Energy Recovery Systems:

Some screw vacuum pumps are equipped with energy recovery systems that capture and utilize energy that would otherwise be wasted. These systems can include heat exchangers or energy regeneration units that repurpose excess heat from the pump’s operation. By utilizing this recovered energy for other processes, such as preheating or heating applications, energy recovery systems contribute to increased overall system efficiency.

5. Optimized Pump Design:

Manufacturers continuously work on optimizing the design of screw vacuum pumps to improve energy efficiency. This can involve reducing internal friction, optimizing rotor profiles, and minimizing leakage paths. These design enhancements aim to maximize the pump’s performance while minimizing energy losses, resulting in improved overall energy efficiency.

6. Energy Monitoring and Analysis:

Energy-efficient screw vacuum pumps often come with built-in energy monitoring and analysis features. These systems allow operators to monitor the energy consumption of the pump in real-time and analyze energy usage patterns. By identifying energy-intensive periods or inefficiencies, operators can make informed decisions to optimize the pump’s operation and further improve energy efficiency.

7. Energy Efficiency Certifications:

Energy-efficient screw vacuum pumps may carry energy efficiency certifications or labels, such as the ENERGY STAR® certification or the European Union’s Energy Efficiency Directive compliance. These certifications provide reassurance that the pump has undergone testing and meets specific energy efficiency criteria, providing confidence in its energy-saving capabilities.

In summary, energy-efficient options for screw vacuum pumps exist and incorporate features such as Variable Frequency Drives (VFD), high-efficiency motors, advanced control systems, energy recovery systems, optimized pump design, energy monitoring and analysis capabilities, and energy efficiency certifications. By utilizing these energy-efficient options, industries can reduce energy consumption, lower operating costs, and minimize their environmental impact.

screw vane pump

What are the maintenance and servicing requirements for screw vacuum pumps?

Screw vacuum pumps require regular maintenance and servicing to ensure optimal performance, reliability, and longevity. Here’s a detailed explanation of the typical maintenance and servicing requirements for screw vacuum pumps:

1. Regular Inspections:

Perform regular visual inspections of the screw vacuum pump to check for any signs of wear, damage, or leaks. Inspect the pump, motor, and associated components for loose connections, worn-out parts, or abnormal vibrations. Ensure that all safety features and interlocks are functioning correctly.

2. Lubrication:

If the screw vacuum pump is equipped with lubrication points, follow the manufacturer’s guidelines for lubrication intervals and the type of lubricant to use. Proper lubrication helps reduce friction, wear, and heat generation, ensuring smooth operation and extending the life of the pump.

3. Cleaning and Filtration:

Keep the screw vacuum pump and its surrounding area clean and free from debris, dust, or contaminants that can affect its performance. Regularly clean or replace air filters to prevent clogging and maintain proper airflow. Clean the pump’s exterior surfaces using suitable cleaning agents and methods recommended by the manufacturer.

4. Belt and Pulley Maintenance:

If the screw vacuum pump is belt-driven, inspect the condition of the belts and pulleys regularly. Check for any signs of wear, cracks, or belt tension issues. Adjust or replace belts as necessary to maintain proper tension and alignment, ensuring efficient power transmission.

5. Cooling System Maintenance:

If the screw vacuum pump is equipped with a cooling system, regularly check and maintain the cooling components. Clean or replace cooling fins, check coolant levels, and ensure proper circulation to prevent overheating and ensure optimal cooling efficiency.

6. Seal Inspection and Replacement:

Inspect the seals, gaskets, and O-rings of the screw vacuum pump regularly. Look for signs of wear, leaks, or degradation. Replace worn-out or damaged seals promptly to maintain proper sealing and prevent air leaks that can impact the pump’s performance.

7. Vibration and Noise Monitoring:

Monitor the vibration and noise levels during the operation of the screw vacuum pump. Excessive vibration or unusual noise can indicate a mechanical problem or misalignment. Take corrective measures if required to minimize vibration and noise, ensuring smooth and quiet operation.

8. Scheduled Maintenance:

Follow the manufacturer’s recommended maintenance schedule for the screw vacuum pump. This may include periodic servicing, such as changing of oil or fluids, inspection and replacement of internal components, and performance checks. Adhering to the scheduled maintenance helps prevent unexpected breakdowns and ensures the pump operates at its best.

9. Expert Servicing:

For complex maintenance or repairs, it is advisable to seek the assistance of qualified technicians or service professionals with experience in screw vacuum pumps. They have the expertise and knowledge to diagnose and resolve issues effectively, ensuring proper maintenance and servicing of the pump.

10. Training and Documentation:

Ensure that the personnel responsible for the screw vacuum pump’s maintenance and servicing are adequately trained on the proper procedures, safety guidelines, and best practices. Maintain comprehensive documentation, including service records, manuals, and relevant technical information for reference and future servicing needs.

In summary, regular inspections, lubrication, cleaning, filtration, belt and pulley maintenance, cooling system maintenance, seal inspection and replacement, vibration and noise monitoring, scheduled maintenance, expert servicing, training, and documentation are important aspects of maintaining and servicing screw vacuum pumps. By following these guidelines and the manufacturer’s recommendations, the pump can operate efficiently, minimize downtime, and have an extended service life.

screw vane pump

Can screw vacuum pumps handle both dry and wet processes?

Yes, screw vacuum pumps are capable of handling both dry and wet processes, making them versatile for a wide range of applications. The ability to handle both types of processes depends on the specific design and configuration of the screw vacuum pump, as well as any additional features or accessories that may be incorporated. Here’s a detailed explanation:

Dry Processes:

In dry processes, the screw vacuum pump operates without the presence of liquid or moisture. Dry screw vacuum pumps rely on tight clearances between the rotors (screws) and the pump housing to create an effective seal. This seal prevents gas or vapor from leaking back into the inlet or escaping to the atmosphere. The absence of liquid or moisture in the process stream helps maintain the integrity of the pump’s sealing mechanism and ensures reliable operation. Dry screw vacuum pumps are commonly used in applications where the process gas or vapor is predominantly dry and free from liquid carryover or condensable vapors.

Wet Processes:

In wet processes, the screw vacuum pump encounters liquids or moisture along with gas or vapor. These liquids can be in the form of condensable vapors, liquid carryover, or entrained liquid droplets. To handle wet processes, screw vacuum pumps may incorporate additional features or accessories to prevent damage, maintain performance, and ensure reliable operation. Some common methods used to handle wet processes include:

  • Liquid Seals: Certain screw vacuum pump designs utilize a liquid sealant to create a barrier between the process gas or vapor and the pump’s internal components. The liquid sealant helps prevent gas leakage, provides lubrication, and assists in sealing the clearances between the rotors and housing. This feature enables the pump to handle wet processes effectively by containing the liquid and maintaining proper sealing.
  • Separators and Filters: Screw vacuum pumps can be equipped with separators and filters to separate liquid droplets or solid particles from the gas or vapor stream. These components help protect the pump from potential damage caused by liquid or solid contamination and ensure the efficient operation of the pump.
  • Specific Design Considerations: Screw vacuum pump manufacturers may incorporate design modifications to enhance the pump’s ability to handle wet processes. This can include optimized clearances, corrosion-resistant materials, and specialized coatings or treatments to protect against liquid or moisture exposure.

It’s important to note that the specific capabilities of a screw vacuum pump in handling wet processes may vary between different models and manufacturers. Therefore, when selecting a screw vacuum pump for a wet process application, it is advisable to consult the manufacturer’s specifications, recommendations, and any additional guidance provided to ensure the pump is suitable for the intended process conditions.

In summary, screw vacuum pumps can handle both dry and wet processes, although the specific design and features of the pump may need to be considered for optimal performance in wet applications. Dry screw vacuum pumps are suitable for predominantly dry processes, while wet processes may require the use of liquid seals, separators, filters, or specialized design considerations to handle the presence of liquids or moisture effectively.

China best Conveying Dry Screw Vacuum Pumps   vacuum pump and compressor	China best Conveying Dry Screw Vacuum Pumps   vacuum pump and compressor
editor by CX 2023-11-13

in Malegaon India sales price shop near me near me shop factory supplier Pre-Galvanized Base Adjustable Prop Jack and Hollow Screw Jack Base manufacturer best Cost Custom Cheap wholesaler

  in Malegaon India  sales   price   shop   near me   near me shop   factory   supplier Pre-Galvanized Base Adjustable Prop Jack and Hollow Screw Jack Base manufacturer   best   Cost   Custom   Cheap   wholesaler

we are assured to offer our buyers versatile and diversified companies. With numerous years’ expertise in this line, we will be trustworthy by our rewards in aggressive cost, 1-time shipping and delivery, prompt response, on-hand engineering assist and very good soon after-sales providers.Additionally, all our production methods are in compliance with ISO9001 specifications. PersonnelOur sales people are well trained to accommodate your requests and talk English for your convenience.
Scaffolding Accessories Base Jack/Screw Jack

one.Description Of Scaffolding Screw Jack
The Screw Jack is made from a one 3/eight inch Sound Stem, or a 1 three/eight inch Hollow EPT, with 6 quot x 6 quot base amp a
big wing nut 4 adjustment. Thread Screw jacks are the accent utilized to safely and securely modify the scaffold legs.
This may be needed when different doing work heights are encountered or when the scaffold is mounted
on sXiHu (West EPT) Dis.Hu (West EPT) Dis.ed surfaces.
two.Prerequisite of scaffolding screw jack
a.EPT loading ability
b.FleXiHu (West EPT) Dis.capable and protected
c.EPTT adjustable length
d.EPT condition
e.Hold a easy tension
f.A variety of variety and measurement
three. Specification of Scaffolding Screw Jack

Title No. Size Diameter Excess weight
Strong Jack Foundation SSSJB600 600mm 34mm 4.5kg
Solid Jack Base SSSJB700 700mm 32mm 4.3kg
Reliable U EPT Jack SSSUJ600 600mm 34mm four.8kg
Reliable U EPT Jack SSSUJ700 700mm 32mm four.5kg
Hollow Jack Foundation SSHJB600 600mm 38mm three.3kg
Hollow U EPT Jack SSHUJ600 600mm 38mm three.6kg

1.What can you offer as a producer?
A. We provide one-quit resolution and our providers incEPTT Creation, EPTT, Loding, Shippment Buying,
Custom clXiHu (West EPT) Dis.Hu (West EPT) Dis.g, Customized clearing and many others
B. Solution variety: Ringlock System Scaffolding, Cuplock System Scaffolding, Kwikstage Program
Scaffolding, EPTs amp Fittings, Steel Planks, Foundation jacks etc.
C. OEM and ODM support supplied upon customer request.
How can I EPTT your top quality?
one. EPTT EPT has been accessed by Sira Certification Support and discovered to comply with
ISO9001:2008 for the manufacture and income of scaffolds. EPTT inspectors exaEPT the EPTT manufacturing
movement from uncooked content selection to last merchandise.
2. Basic safety is the primary problem in EPTT. All components are backed up by an intense examination software,
fabricated either by vehicle-welding EPTTs or gentleman EPTs(EPTs have acquired Welder’s Qualification
Test Certification from SGS).

Get in touch with Us:
Eva XiHu (West EPT) Dis.n

  in Malegaon India  sales   price   shop   near me   near me shop   factory   supplier Pre-Galvanized Base Adjustable Prop Jack and Hollow Screw Jack Base manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Malegaon India  sales   price   shop   near me   near me shop   factory   supplier Pre-Galvanized Base Adjustable Prop Jack and Hollow Screw Jack Base manufacturer   best   Cost   Custom   Cheap   wholesaler